Ubuntu Archives - Moody Coder

Define custom virtual hosts Now you are ready to add your own virtual hosts so that you can start to serve your domains. Create the vhost file for domain1: The contents look as follows: Enable the site Enable the site as follows: […]

Define custom virtual hosts

Now you are ready to add your own virtual hosts so that you can start to serve your domains.

Create the vhost file for domain1:

sudo nano /etc/apache2/sites-available/domain1.com.conf

The contents look as follows:

# Place any notes or comments you have here
# It will make any customisation easier to understand in the weeks to come

# domain: domain1.com
# public: /home/demo/public_html/domain1.com/

<VirtualHost *:80>

  # Admin email, Server Name (domain name) and any aliases
  ServerAdmin [email protected]
  ServerName  domain1.com
  ServerAlias www.domain1.com


  # Index file and Document Root (where the public files are located)
  DirectoryIndex index.html
  DocumentRoot /home/demo/public_html/domain1.com/public


  # Custom log file locations
  LogLevel warn
  ErrorLog /var/log/apache2/error-mydomainname.com.log
  CustomLog /var/log/apache2/access-mydomainname.com.log combined

</VirtualHost>

Enable the site

Enable the site as follows:

sudo a2ensite domain1.com

The output of the command is as follows:

Site domain1.com installed; run /etc/init.d/apache2 reload to enable.

Run the recommended command:

sudo /etc/init.d/apache2 reload

Navigate to the site

To test the domain without creating a DNS zone and records on some Internet name servers, you can modify the ‘/etc/hosts’ file on your local computer to include some entries mapping ‘domain1.com’, ‘domain2.com’, and the rest to the demo Cloud Server’s public IP address:

127.0.0.1    localhost
...

# entries related to the demo Cloud Server
123.45.67.890   domain1.com
123.45.67.890   www.domain1.com
123.45.67.890   domain2.com
...

The location of the ‘hosts’ file varies depending on what OS is loaded on your local computer.

Note: Entries in the ‘hosts’ file must be removed prior to testing and using live DNS zones and records created on Internet name servers. Failure to remove them might lead to confusion on your part and inaccurate tests of new or modified public DNS records.

With such changes made for testing purposes, you can navigate to your site in a web browser on your local computer and the contents of the public/index.html file are shown.

Use the ServerAlias

Note that in the vhost file, you set a ServerAlias. If you have the DNS set up correctly, you can also use that address.

We’ll talk about forcing one address or the other in a later article about rewrite rules.

Repeat the process for the other domain

To create and enable domain2.com, repeat the process as follows:

Create the vhost file:sudo nano /etc/apache2/sites-available/domain2.com ... # Enter the details for domain2.com as per the example shown above
Enable the site and restart Apache:sudo a2ensite domain2.com ... sudo /etc/init.d/apache2 reload
Navigate to the second domain:http://domain2.com or http://www.domain2.com

You should see the ‘domain2.com’ index file.

View log files

As defined in the vhosts file, each domain has its own log files.

List the logs for your domains:

ls /var/log/apache2/error-mydomainname.com.log

The output is exactly as expected:

access.log  error.log

Default vhost file

Although you changed the default virtual host, you did leave it in place.

If someone enters the IP address of the cloud server, they are served the contents of that default vhosts file (if you did not set up a separate vhost for the IP address).

Why are they served from that vhost file?

Apache searches the enabled vhost files in alphabetical order and if it can’t find one for the requested IP address or domain name, it serves the first one (alphabetically).

If you had disabled or deleted the default vhost file, then the contents of domain1.com would be displayed (being before domain2.com alphabetically).

This is something to consider when planning your websites. Do you want a particular domain to be the default? Do you want the IP address to have completely different content?

Set the admin email address

Set the email address for the server administrator. This address is used if you set up the server to contact you when errors occur. It is also shown in the ServerSignature if its value is set to Email. (See the section Define Apache footers.

ServerAdmin [email protected]

Set the domain name

Set the domain name (ServerName) for the virtual host. You can have as many aliases (ServerAlias) as required. For example, you can have domain.com and domain.net point to the same content.

ServerName domain.com
ServerAlias www.domain.com

Note: This is not a rewrite rule, but the domains defined here will serve the same content (assuming you have set the DNS to point to your Cloud Server IP).

Define the index file

Define the index file (the home page that is shown when the domain address is entered). This is useful if you have wanted the user to be directed to an alternate page or to a nonstandard home page.

DirectoryIndex index.html

Note: This is not a good method for redirecting users because they might go directly to a nonspecified page, such as domain.com/index.php, while the DirectoryIndex value works only for those entering domain.com.

Define the path of a documents

Define the location of the domain’s public files. Use an absolute pathname.

DocumentRoot /home/demo/public_html/domain.com/public

Set the log files

Set the log levels and the location for the virtual hosts’ log files.

LogLevel warn
ErrorLog  /var/log/apache2/error-mydomainname.com.log
CustomLog /var/log/apache2/access-mydomainname.com.log combined

Define error documents

Set the ErrorDocument, which is used for all the standard error messages.

ErrorDocument 404 /errors/404.html
ErrorDocument 403 /errors/403.html

In this example, there is an ‘errors’ folder in the public directory. Each error document was created and placed in the errors folder. The paths shown are relative to the DocumentRoot folder defined previously.

If error messages are not defined, Apache generates its own error pages. Custom error pages are more user-friendly and can be customized as much, or as little, as you want.

Define Apache footers

Define ServerSignature to specify whether the server details are displayed in any server-generated error pages or index lists. Options are On, Off, and Email.

ServerSignature On

The level of detail in the signature is configured via ServerTokens, which cannot be set in the Virtual Hosts file. For Ubuntu’s Apache layout, this is properly set in ‘/etc/apache2/conf.d/security’. See the Apache configuration #2 NEED LINK article for more details.

If ServerSignature is set to Email, the ServerAdmin email will be displayed.

Enable CGI-bin

Enable the CGI-bin location as defined by the custom virtual hosts layout. You can leave CGI-bin in the DocumentRoot location if you so want.

ScriptAlias /cgi-bin/ /home/demo/public_html/domain.com/cgi-bin/
<Location /cgi-bin>
  Options +ExecCGI
</Location>

Set directory options

Set the options for the specified directory. The following example enables the FollowSymLinks option for the public directory of domain.com.

  Options FollowSymLinks

Following are other options that you can set:

Directory browsing option

To turn off directory browsing, use -Indexes. To turn on directory browsing, use +Indexes.

Options -Indexes

SSI option

Enable or disable Server Side Includes. The following example disables it.

Options -Includes

Symlinks option

Enable or disable the option to follow symlinks. Be careful with this option because it can lead to security risks (inadvertently linking to configuration folders).

Options -FollowSymLinks

You can consider using the SymLinksIfOwnerMatch directive instead of FollowSymLinks. The SymLinksIfOwnerMatch directive allows symbolic links to be followed only if the owner of the link is identical to the owner of the target file or directory (in terms of Linux file system ownership/permissions). This prevents many of the security risks that a simple FollowSymlinks directive can create.

.htaccess option

Set AllowOverride to None to disable .htaccess support. Set it to All to allow support.

AllowOverride None

You can also specify which .htaccess features to enable, such as:

AllowOverride AuthConfig Indexes

The Apache htaccess and AllowOverride docs have more information about the different features.

Remember to specifically protect your .htaccess file. You can do this by renaming it to something obscure and denying access to the file from external sources:

AccessFileName .myobscurefilename
<Files ~ "^\.my">
    <SatisfyAll>
    Require all denied
    </SatisfyAll>
</Files>

Note: The preceding example is formatted for Apache 2.4. If using 2.2, replace <SatisfyAll> Require all denied </SatisfyAll> ** with **Order Allow,Deny | Deny from all | Satisfy all.

No Options

Specify None to turn off all the available options.

Options None

Options hierarchy

The options directives can be set per-directory, as shown in the following example:

  AllowOverride None
  Options None

AllowOverride All

The first directory setting would turn off all options and disable .htaccess support for all directories.

However, the second directory setting would override the first and allow .htaccess support for the domain.com/public directory.

Moody Coder

Category: Ubuntu

Apache virtual hosts on Ubuntu

How to Secure Apache With Let’s Encrypt on Ubuntu 18.04 & Ubuntu 16.04 LTS